Key Fob Battery Replacement | How To | 2020 Jeep Grand Cherokee
https://happy-buy.ru/Se0a1Y.php - купить на aлиэкспресс (NBJKATO совершенно новый конец тяги 68069647AA, 68069646AB для Jeep Grand Cherokee) Внимание! Если ссылка ведет не на тот продукт, который Вы искали, воспользуйтесь поиском по сайту! If the battery in your 2020 Jeep Grand Cherokee's key fob stops working, it may need a new battery. Learn how to replace it here. Transcript [music playing] No battery lasts forever, and that includes the one in your key fob. But fortunately, replacing it is easier than you think. All you need is a small flat-blade screwdriver and a new battery – in this case, a CR2032 3-volt. First, slide the mechanical latch on the back of the key fob sideways, and remove the emergency key. Insert a flat-blade screwdriver into the gap next to the emergency key slot, and carefully pry the cover slightly open. Using your fingers, separate the case. Then use the screwdriver to pry out the old battery. [Text on screen] Replacement battery can be purchased at a Mopar authorized dealer. [Voice over] Insert a new battery with the positive pole facing down… put the case back together… and snap it shut. Now, just reinsert the emergency key, and you should be all set. This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information. [Text on screen] Copyright 2020 FCA US LLC. All Rights Reserved. Jeep and Mopar are registered trademarks of FCA US LLC. Реклама. Рекламодатель ООО "АЛИБАБА.КОМ (РУ)" ИНН 7703380158, https://aliexpress.ru/
https://happy-buy.ru/Se0a1Y.php - купить на aлиэкспресс (NBJKATO совершенно новый конец тяги 68069647AA, 68069646AB для Jeep Grand Cherokee) Внимание! Если ссылка ведет не на тот продукт, который Вы искали, воспользуйтесь поиском по сайту! If the battery in your 2020 Jeep Grand Cherokee's key fob stops working, it may need a new battery. Learn how to replace it here. Transcript [music playing] No battery lasts forever, and that includes the one in your key fob. But fortunately, replacing it is easier than you think. All you need is a small flat-blade screwdriver and a new battery – in this case, a CR2032 3-volt. First, slide the mechanical latch on the back of the key fob sideways, and remove the emergency key. Insert a flat-blade screwdriver into the gap next to the emergency key slot, and carefully pry the cover slightly open. Using your fingers, separate the case. Then use the screwdriver to pry out the old battery. [Text on screen] Replacement battery can be purchased at a Mopar authorized dealer. [Voice over] Insert a new battery with the positive pole facing down… put the case back together… and snap it shut. Now, just reinsert the emergency key, and you should be all set. This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information. [Text on screen] Copyright 2020 FCA US LLC. All Rights Reserved. Jeep and Mopar are registered trademarks of FCA US LLC. Реклама. Рекламодатель ООО "АЛИБАБА.КОМ (РУ)" ИНН 7703380158, https://aliexpress.ru/