Puig Windscreen Install on the 2020 Husqvarna 701 Enduro LR with aluminum handguards
This Puig Windscreen is available at the following link: https://amzn.to/3edYr1q This Puig Windscreen installation for the 2020 Husqvarna 701 Enduro LR with aluminum handguards requires modification to preserves the OEM front brake cable set up. The Husky 701 Enduro LR is a great go anywhere bike but it needs wind protection out on the highway to help it compete with bigger adventure bikes . The Puig Windscreen is the right size to manage the wind while staying out of your way as you negotiate technical off-road terrain. But the manufacturers recommended installation method is not compatible with the Husky 701 when it's equipped with aluminum handguards. This installation of the Puig Windscreen for the Husqvarna 701 Enduro LR creates the needed clearance to avoid interference from the handguards while providing better airflow at speed. This Puig Windscreen is a necessary upgrade that will help turn this 2020 Husqvarna 701 enduro LR into what could be the ultimate adventure bike without going full blown Rally conversion. The goal here is to build a bike that can go anywhere and do anything...better than my GS or other 400-500 pound adventure bikes that are so popular these days. ...Well at least that's the goal of the 30 plus modifications that are planned for this Husky 701 enduro. I hope this video is helpful, I'm always delighted to get your questions comments and feedback. Remember you can also find me at https://dualsportgarage.com/ Thanks for watching! Puig Windscreen New Generation Husqvarna 701 C/Clear,9867W https://amzn.to/3KifVqJ Aluminum Round Straight Tubing Tube 1 Feet Length 0.273 Inches ID 0.429 Inches OD https://amzn.to/3KjLosQ 1/4 20 x 2 inch Stainless Machine Screws(4) https://amzn.to/3ZskxyQ 1/4 20 Stainless Lock Nuts (4) https://amzn.to/3zgkED1 3/4 Rubber Washers https://amzn.to/3Zw8jFs Optional Tip: Sandwiching Stainless Washers on the inside and outside surface of the windscreen can add strength. Check your local hardware store or find them here: https://amzn.to/3nuFrAc Tools: Torx 30 Driver 1/4 inch Drill Phillips Driver 11mm Wrench Hacksaw (or even better a plumbers pipe cutter) Metal File Note: I received no free product and I was not paid to make this video. However this channel is subsidized in part by small commissions paid on some product links. So it is helpful and very much appreciated when you use these links to support this channel.
This Puig Windscreen is available at the following link: https://amzn.to/3edYr1q This Puig Windscreen installation for the 2020 Husqvarna 701 Enduro LR with aluminum handguards requires modification to preserves the OEM front brake cable set up. The Husky 701 Enduro LR is a great go anywhere bike but it needs wind protection out on the highway to help it compete with bigger adventure bikes . The Puig Windscreen is the right size to manage the wind while staying out of your way as you negotiate technical off-road terrain. But the manufacturers recommended installation method is not compatible with the Husky 701 when it's equipped with aluminum handguards. This installation of the Puig Windscreen for the Husqvarna 701 Enduro LR creates the needed clearance to avoid interference from the handguards while providing better airflow at speed. This Puig Windscreen is a necessary upgrade that will help turn this 2020 Husqvarna 701 enduro LR into what could be the ultimate adventure bike without going full blown Rally conversion. The goal here is to build a bike that can go anywhere and do anything...better than my GS or other 400-500 pound adventure bikes that are so popular these days. ...Well at least that's the goal of the 30 plus modifications that are planned for this Husky 701 enduro. I hope this video is helpful, I'm always delighted to get your questions comments and feedback. Remember you can also find me at https://dualsportgarage.com/ Thanks for watching! Puig Windscreen New Generation Husqvarna 701 C/Clear,9867W https://amzn.to/3KifVqJ Aluminum Round Straight Tubing Tube 1 Feet Length 0.273 Inches ID 0.429 Inches OD https://amzn.to/3KjLosQ 1/4 20 x 2 inch Stainless Machine Screws(4) https://amzn.to/3ZskxyQ 1/4 20 Stainless Lock Nuts (4) https://amzn.to/3zgkED1 3/4 Rubber Washers https://amzn.to/3Zw8jFs Optional Tip: Sandwiching Stainless Washers on the inside and outside surface of the windscreen can add strength. Check your local hardware store or find them here: https://amzn.to/3nuFrAc Tools: Torx 30 Driver 1/4 inch Drill Phillips Driver 11mm Wrench Hacksaw (or even better a plumbers pipe cutter) Metal File Note: I received no free product and I was not paid to make this video. However this channel is subsidized in part by small commissions paid on some product links. So it is helpful and very much appreciated when you use these links to support this channel.