Accurately judge the failure of MacBook Pro 15inch not displayed
MacBook repair Tool purchase link: https://masterliuonline.com/products/s-uem2-mac-usb-c-and-edp-meter S-UEM2 Introduction and Applicable Model 一，Introduction 1, S-UEM2 is a tester for USB-C and EDP connector of MacBook logic board 2, Using LED color screen, display and operation are more convenient 3. Support Type_C, Micro USB cable power input, Support AAA battery power input (Easy to carry) 4. S-UEM2 include a host, 3 connecting cables, and 2 adapter boards 二， Usefulness 1. Quickly judge the fault point of the 5V-20V boost through the USB-C connector 2. Quickly judge the failure point of no display or camera not working through the EDP display connector 3. The S-UEM2 host has written the correct diode value of the 2016-2020 MacBook logic board connector 4. If the measured value of the connector is high, low or short circuit will be displayed 三，Applicable model 1, S-UEM2 is suitable for measuring 2016-2020 MacBook motherboard 2, Including A1706, A1708, A1707, A1989, A1990, A2159, A1932, A2179, A2289, A2251, A2141 etc. 3. The normal values of JB500/J3300_CWR, J3300/J3300_CXT and J8500 EDP connector are written inside JB500/J3300_CWR is connected to the USB-C port on the right side of the motherboard J3300/J3300_CXT is connected to the USB-C port on the left side of the motherboard EDP J8500 connect to the display interface of the motherboard
MacBook repair Tool purchase link: https://masterliuonline.com/products/s-uem2-mac-usb-c-and-edp-meter S-UEM2 Introduction and Applicable Model 一，Introduction 1, S-UEM2 is a tester for USB-C and EDP connector of MacBook logic board 2, Using LED color screen, display and operation are more convenient 3. Support Type_C, Micro USB cable power input, Support AAA battery power input (Easy to carry) 4. S-UEM2 include a host, 3 connecting cables, and 2 adapter boards 二， Usefulness 1. Quickly judge the fault point of the 5V-20V boost through the USB-C connector 2. Quickly judge the failure point of no display or camera not working through the EDP display connector 3. The S-UEM2 host has written the correct diode value of the 2016-2020 MacBook logic board connector 4. If the measured value of the connector is high, low or short circuit will be displayed 三，Applicable model 1, S-UEM2 is suitable for measuring 2016-2020 MacBook motherboard 2, Including A1706, A1708, A1707, A1989, A1990, A2159, A1932, A2179, A2289, A2251, A2141 etc. 3. The normal values of JB500/J3300_CWR, J3300/J3300_CXT and J8500 EDP connector are written inside JB500/J3300_CWR is connected to the USB-C port on the right side of the motherboard J3300/J3300_CXT is connected to the USB-C port on the left side of the motherboard EDP J8500 connect to the display interface of the motherboard