NCAA 14- 2019 Roster and Schedule File Instructions
Tutorial on how to download 2019 rosters and use a 2019 schedule file for the dynasty mode for Xbox 360. Here is what you'll need and detailed instructions: https://www.reddit.com/r/NCAAFBseries/comments/cxic3u/201920_roster_schedule_for_dynasty_mode/ Here are the schedule file and programs you'll need: 2019 Conference Alignment File https://drive.google.com/file/d/0B1OhDxFoLM13VlhYRFVLb1ZDZXhmSDBkMXVzeFlfaEF3ckx3/view 2019 Schedule File https://drive.google.com/open?id=10VcJckL6Ihr2n38fa7q9sZugpxFQxQY1 Modio https://modio.en.uptodown.com/windows/download/37775 EA DB Editor https://www.mediafire.com/file/dl64dzq0qw0psb4/EA_DB_Editor.zip/file NCAA Dynasty Editor https://www.mediafire.com/file/ihkbd3jjvolkc0t/NCAA_Dynasty_Editor.zip/file HxD (Hex Editor) https://download.cnet.com/HxD-Hex-Editor/3000-2352_4-10891068.html Instructions: 0. I recommend downloading 2019 rosters, the file I have been using is from Darkjr4 1. Put USB into Xbox and create a dynasty- Make any edits you want to the custom conferences or anything else, then proceed to the pre season. Don't touch anything once you're in the pre season, just save the file. (For me, I just added Rutgers and Maryland to the B10, Louisville to the ACC, and a few other small changes). 2. Remove the USB from the Xbox and put it into your computer, then extract the file using Modio . You'll need to extract it twice because you'll need to have one original file and one file to edit, so I would recommend putting them in different folders- (I saved one on my desktop (file A) one in downloads folder for reference (file B). 3. Using Modio, then click "Open a save", go to your USB, click "Content", then click the folder that has starts with "E", then just keep clicking the folders until you see your dynasty file. Choose your dynasty file and in the top right corner, click "File contents", right click on the dynasty file and choose "Extract file". Remember to extract the file twice as mentioned above. Leave Modio open. 4. For 360, you'll need to first open up the EA DB editor and save file A as a MC02 file to open in the NCAA Dynasty Editor-( it's not as confusing as it sounds, trust me it's the next step!) 5. Open the EA DB Editor, - file - load config. navigate to the folder where the EA DB Editor is and click on Xan's NCAA 14 Dynasty Config (sometimes you may get an error message, just ignore this). 6. Hit File - Open and open file A (you'll likely need to go to the drop-down in the bottom right and select all). Then Simply go File - Save As - then type in the name of the dynasty file you saved and save over this file. (file A). 7. Open the NCAA Dynasty Editor and choose "file"- find the dynasty file A that you just extracted. Once it loads into the editor, go to the "Organization" tab and the "Schedule" tab should already be selected. Go back to "File"- "Import current table" and choose the 2019 Schedule File. The new schedule should then load into the editor. Go back to file and click save. 8. Go into the folder were you saved file A- you'll see the original, and the one you just saved with a .MC02 extension. Delete the file without the MC02 ( you can ignore the files with a database file type). Then for the remaining file, delete the .MC02 from the file. It will ask if you want to change the file type, the answer is yes. 9. Open the HdX hex editor -Open both the original dynasty file (file B) and the file that you made the edits in (file A). I would open the original file first (file B), so you know which one is which. If you click back and forth between the two files, you'll notice that the second row under "Offset" is different, while everything else looks the same. On the original file (File B), you'll need to highlight everything from "00" to "OB" and right click then hit copy. Now, go to the edited file (file A) and highlight the same characters, right click again and choose "Paste write". The string of characters should turn red, but by pressing (control + S), they will turn back to black. At this point, you should be able to click back and forth between the two files and they'll look exactly the same. 10. Go back to Modio and right click on the dynasty file, hit "Replace", find your edited dynasty file (file A), remove the USB from the computer, put it back in the Xbox and you should be good to go! Tip: Keep an eye on the "date modified" column when replacing the files, especially during the last step so you're not replacing your dynasty with the same file that you originally made. It's not too complicated, just more time consuming. Let me know if you need any more help! I'm going to make a video about the process later this week, this may seem like a lot, but it's worth it!
Tutorial on how to download 2019 rosters and use a 2019 schedule file for the dynasty mode for Xbox 360. Here is what you'll need and detailed instructions: https://www.reddit.com/r/NCAAFBseries/comments/cxic3u/201920_roster_schedule_for_dynasty_mode/ Here are the schedule file and programs you'll need: 2019 Conference Alignment File https://drive.google.com/file/d/0B1OhDxFoLM13VlhYRFVLb1ZDZXhmSDBkMXVzeFlfaEF3ckx3/view 2019 Schedule File https://drive.google.com/open?id=10VcJckL6Ihr2n38fa7q9sZugpxFQxQY1 Modio https://modio.en.uptodown.com/windows/download/37775 EA DB Editor https://www.mediafire.com/file/dl64dzq0qw0psb4/EA_DB_Editor.zip/file NCAA Dynasty Editor https://www.mediafire.com/file/ihkbd3jjvolkc0t/NCAA_Dynasty_Editor.zip/file HxD (Hex Editor) https://download.cnet.com/HxD-Hex-Editor/3000-2352_4-10891068.html Instructions: 0. I recommend downloading 2019 rosters, the file I have been using is from Darkjr4 1. Put USB into Xbox and create a dynasty- Make any edits you want to the custom conferences or anything else, then proceed to the pre season. Don't touch anything once you're in the pre season, just save the file. (For me, I just added Rutgers and Maryland to the B10, Louisville to the ACC, and a few other small changes). 2. Remove the USB from the Xbox and put it into your computer, then extract the file using Modio . You'll need to extract it twice because you'll need to have one original file and one file to edit, so I would recommend putting them in different folders- (I saved one on my desktop (file A) one in downloads folder for reference (file B). 3. Using Modio, then click "Open a save", go to your USB, click "Content", then click the folder that has starts with "E", then just keep clicking the folders until you see your dynasty file. Choose your dynasty file and in the top right corner, click "File contents", right click on the dynasty file and choose "Extract file". Remember to extract the file twice as mentioned above. Leave Modio open. 4. For 360, you'll need to first open up the EA DB editor and save file A as a MC02 file to open in the NCAA Dynasty Editor-( it's not as confusing as it sounds, trust me it's the next step!) 5. Open the EA DB Editor, - file - load config. navigate to the folder where the EA DB Editor is and click on Xan's NCAA 14 Dynasty Config (sometimes you may get an error message, just ignore this). 6. Hit File - Open and open file A (you'll likely need to go to the drop-down in the bottom right and select all). Then Simply go File - Save As - then type in the name of the dynasty file you saved and save over this file. (file A). 7. Open the NCAA Dynasty Editor and choose "file"- find the dynasty file A that you just extracted. Once it loads into the editor, go to the "Organization" tab and the "Schedule" tab should already be selected. Go back to "File"- "Import current table" and choose the 2019 Schedule File. The new schedule should then load into the editor. Go back to file and click save. 8. Go into the folder were you saved file A- you'll see the original, and the one you just saved with a .MC02 extension. Delete the file without the MC02 ( you can ignore the files with a database file type). Then for the remaining file, delete the .MC02 from the file. It will ask if you want to change the file type, the answer is yes. 9. Open the HdX hex editor -Open both the original dynasty file (file B) and the file that you made the edits in (file A). I would open the original file first (file B), so you know which one is which. If you click back and forth between the two files, you'll notice that the second row under "Offset" is different, while everything else looks the same. On the original file (File B), you'll need to highlight everything from "00" to "OB" and right click then hit copy. Now, go to the edited file (file A) and highlight the same characters, right click again and choose "Paste write". The string of characters should turn red, but by pressing (control + S), they will turn back to black. At this point, you should be able to click back and forth between the two files and they'll look exactly the same. 10. Go back to Modio and right click on the dynasty file, hit "Replace", find your edited dynasty file (file A), remove the USB from the computer, put it back in the Xbox and you should be good to go! Tip: Keep an eye on the "date modified" column when replacing the files, especially during the last step so you're not replacing your dynasty with the same file that you originally made. It's not too complicated, just more time consuming. Let me know if you need any more help! I'm going to make a video about the process later this week, this may seem like a lot, but it's worth it!